Wall-mounted slewing jib crane UNILIFT UW

The easy-running one

Advantages
Description
Technical information
Accessories
Downloads

Advantages

Aluminium profile jib
Ergonomic handling
Easy slewing
Smooth running trolley
Overbraced design, low dead weight of aluminium profile jib arm
Trainling cable system travelling inside the aluminium profile
Jib arm length can be adjusted to conditions on the spot
Broad range of fastenings options provides for easy installation
High-quality coating

Description

The wall-mounted jib arm crane UNILIFT is a smooth-running crane with aluminium jib arm.

You can use it for easy, quick, and safe handling of small loads up to 500 kg; e.g. in logistics or automotive industry. Its overbraced design and lightweight aluminium jib arm enable especially easy slewing of the crane. Thanks to the good running qualities of the internal push trolley, the chain hoist moves quite easily. The handling crane UNILIFT perfectly meets your requirements since the column height can be adjusted individually.

Regarding fastening options, you can make your individual choice from fastening on steel pillar, reinforced concrete pillar, reinforced concrete wall, and steel structure.

Moreover, we offer ELECTROLIFT® chain hoists, slewing limit stops, and locking devices.

This type of slewing jib crane is also available as column-mounted slewing jib crane.

Technical Information

Wall-mounted slewing jib crane
Type designation: UNILIFT UW
Capacity: 80 to 500 kg
Outreach: 1,895 to 5,895 mm
Slewing range max.: 180°
EN 13001 hoisting class: HC2
EN 13001 stability class: S2
Jib design: Overbraced
Insatallation location: Indoor
Slewing: Manual
Hoist: Chain hoist
Aluminium profile jib

Capacity range

Outreach in m	1,9	2,4	2,9	3,4	3,9	4,4	4,9	5,4	5,9
Capacity in kg
80	x	x	x	x	x	x	x	x	x
125	x	x	x	x	x	x	x	x	x
250	x	x	x	x	x	x	x	x	x
320	x	x	x	x	x	x	x	x
500	x	x	x	x	x	x

Accessories

Fastenings

Fixing on steel pillars

Bearing bracket
The screwable bearing bracket is used to attached jib cranes directly to steel pillars. This fastening is standard delivery scope

Fixing on reinforced concrete pillars

Support embarcing bracket
For fastening jib cranes on reinforced concrete pillars. The front bracket plate is clamped to the pillar by the included threaded rods, nuts and counterplate.

Fixing on concrete walls

Wall bracket
For fastening jib cranes on concrete walls. The bracket plate is mounted on the wall by the included threaded rods, nuts an washers.

Fastening to steel structure

Weld-on bracket
Designed to attach the wall-mounted slewing jib crane to a steel structure which is suitable regarding static strength. The bracket is welded directly onto the steel structure. This fastening option is perfectly suited if is not possible or allowed to drill holes into the existing steel structure.

Surface finish

Paint system for indoor use

Cranes intended to be used in a hall are steel grit blasted and provided with a high-quality coating on the basis of corrosion category C2. It is suitable for minor atmospheric stress. The standard colour is anthracite grey (RAL 7016) with a nominal layer thickness of 80 µm. The jib is finished in Aluminium anadised as standard.

Other RAL shades, corrosion categories, and layer thicknesses are available as an option.

Other accessories

Slewing limitation

Mechanical slewing limitation, can be installed and adjusted easily and continuously.

Locking device

For locking the jib arm in several positions. Applied by lever arm / traction rope (depending on crane
type) with control lever. Also to be used as immobilizer system up to wind force 7 Beaufort (only when
crane is switched off and hoist is in idle position).

Downloads

VETTER Complete Catalogue

German / English
PDF, 22 MB

Download

VETTER solutions for