Wall-mounted slewing jib crane
Type UW-ST
Product highlights
- Hollow profile rail made of steel
- Adjustable jib arm elevation for easy alignment
- High stability despite the boom’s low weight
- Modern, compact design
- Low operating forces
- Smooth, effortless movement of the chassis
- Power supply via trailing cable in the boom profile
- The jib arm length can be adjusted to suit the room layout
- Easy to install thanks to a wide range of mounting options
The smooth-running model with a hollow-profile steel jib arm
The UW-ST wall-mounted jib crane impresses with its exceptionally smooth operation and a jib made from robust hollow-section steel.
It is the sturdy and durable solution for the safe handling of loads weighing up to 1,000 kg in industrial, manufacturing and workshop environments. The braced design ensures high stability whilst keeping the jib’s own weight low.
The internal running mechanism in the hollow section rail ensures smooth and exceptionally effortless operation. This allows the hoist to be moved precisely and comfortably with minimal effort.
The UW-ST offers maximum flexibility when it comes to mounting: you can choose between mounting on a steel column, reinforced concrete column, reinforced concrete wall or steel structure.
ELECTROLIFT® chain hoists and a swing limiter are available directly from us.
This type of jib crane is also available as a column-mounted jib crane.
Technical data
Capacity range
| Capacity: | 80 - 1000 kg |
| Outreach: | 2000 - 6000 mm |
| Jib clearance: | |
| Total height: | 940 - 1430 mm |
| Slewing range: | 180° |
| EN 13001 Hoisting class: | HC2 |
| EN 13001 Stability class: | S2 |
| Jib design: | Overbraced |
| Slewing: | By hand |
| Hoist: | Chain hoist |
| Trolley drive: | By hand |
| Installation location: | Indoor |
Outreach [m]
Capacity [kg]
| 2 | 3 | 4 | 5 | 6 | |
|---|---|---|---|---|---|
| 80 | |||||
| 125 | |||||
| 250 | |||||
| 320 | |||||
| 630 | |||||
| 800 | |||||
| 1000 |
3D view
Accessories
Fastening
Fixing on steel pillars
Bearing bracket
The screwable bearing bracket is used to attach jib cranes directly to steel pillars. This fastening is standard delivery scope.
Fixing on concrete walls
Wall bracket
For fastening jib cranes on concrete walls. The bracket plate is mounted on the wall by the included threaded rods, nuts an washers.
Fixing on reinforced concrete pillars
Support embarcing bracket
For fastening jib cranes on reinforced concrete pillars. The front bracket plate is clamped to the pillar by the included threaded rods, nuts and counterplate.
Fastening to steel structure
Weld-on bracket
Designed to attach the wall-mounted slewing jib crane to a steel structure which is suitable regarding static strength. The bracket is welded directly onto the steel structure. This fastening option is perfectly suited if is not possible or allowed to drill holes into the existing steel structure.
Dowel fixing to concrete wall
DowelPlate system
The complete solution for doweling the wall-mounted slewing jib crane to an existing, load-bearing concrete wall with the VETTER DowelPlate system.
Power lead
Inside trailing cable power supply
Trailing cable power supply with cable sliders inside the profile incl. end clamp.
Other
Locking device
For locking the jib arm in several positions. Applied by lever arm / traction rope (depending on crane
type) with control lever. Also to be used as immobilizer system up to wind force 7 Beaufort (only when crane is switched off and hoist is in idle position).
Slewing limitation
Mechanical slewing limitation, can be installed and adjusted easily and continuously.