Column-mounted slewing jib crane
Type US-ST
Tip The DowelPlate system VAS2 can be used to fasten the crane.
Product highlights
- Hollow profile rail made of steel
- Adjustable jib arm elevation for easy alignment
- High stability despite the boom’s low weight
- Modern, compact design
- Low operating forces
- Smooth, effortless movement of the chassis
- Power supply via trailing cable in the boom profile
- Column height and boom length can be adapted to the room layout
- Easy installation thanks to dowel fixing to concrete floor (optional)
The easy-to-use model with a hollow-section steel jib arm
The US-ST column-mounted jib crane impresses with its exceptionally easy handling and a jib made from robust hollow-section steel.
It is the sturdy and durable solution for the safe handling of loads weighing up to 1,000 kg in industrial, manufacturing and workshop environments. The braced design ensures high stability whilst keeping the jib’s own weight low.
The internal running mechanism in the hollow profile rail ensures smooth and exceptionally effortless operation. This allows the hoist to be moved precisely and comfortably with minimal effort.
The US-ST offers maximum flexibility when it comes to mounting: you can choose between convenient dowel mounting on concrete floors using the patented VETTER VAS2 composite anchor system, foundation mounting with anchor bolts, TopAnker or KompaktAnker, or a flat base flange for mounting on a steel structure.
ELECTROLIFT® chain hoists and a swing limiter are available directly from us.
This type of jib crane is also available as a wall-mounted jib crane.
Technical data
Capacity range
| Capacity: | 80 - 1000 kg |
| Outreach: | 2000 - 6000 mm |
| Jib clearance: | 1800 - 4500 mm |
| Total height: | 2570 - 5270 mm |
| Slewing range: | 270° |
| EN 13001 Hoisting class: | HC2 |
| EN 13001 Stability class: | S2 |
| Jib design: | Overbraced |
| Slewing: | By hand |
| Crane drive: | By hand |
| Hoist: | Chain hoist |
| Installation location: | Indoor |
Outreach [m]
Capacity [kg]
| 2 | 3 | 4 | 5 | 6 | |
|---|---|---|---|---|---|
| 80 | |||||
| 125 | |||||
| 250 | |||||
| 320 | |||||
| 630 | |||||
| 800 | |||||
| 1000 |
3D view
Accessories
Fastening
Dowels on existing concrete floor
DowelPlate system VAS2
The round solution for doweling the slewing crane on existing concrete floor. No complicated foundation work is necessary.
Anchorage with anchors
AnchorFix
The classical anchorage with anchors, temolate and a set of nuts and washers. Delivery also comprises a detailed foundation plan with information about foundation size and required reinforcement.
Anchorage without screws jutting out
TopAnchor
The alternative anchorage without screws jutting out (no trip hazards). The foundation area is kept free and accessible until the final intallation of the crane. The crane can be put into operation immediately, because no grouting is needed.
Anchorage with optimum ease of installation
CompactAnchor
This anchorage offers th advantages of TopAnchor an is furthermore very easy to install. There is no need to mount separete parts on site. Positioning in the foundation pit is easy done by set screws.
Fastening to steel structure or machine
Base flange, flush
Base flange, flush or plane machined surface, designed to attach the crane to a steel structure or machine. Fastening screws to be provided by the customer.
Power lead
Inside trailing cable power supply
Trailing cable power supply with cable sliders inside the profile incl. end clamp.
Other
Locking device
For locking the jib arm in several positions. Applied by lever arm / traction rope (depending on crane
type) with control lever. Also to be used as immobilizer system up to wind force 7 Beaufort (only when crane is switched off and hoist is in idle position).
Slewing limitation
Mechanical slewing limitation, can be installed and adjusted easily and continuously.
Surface finish
Paint system for indoor use
Cranes intended to be used in a hall are steel grit blasted and provided with a high-quality coating on the basis of corrosion category C2. It is suitable for minor atmospheric stress. The standard colour is daffodil yellow (RAL 7016) with a nominal layer thickness of 80 µm.
Concrete elements without coating.
Other RAL shades, corrosion categories, and layer thicknesses are available as an option.